Ricoh Priport JP1030 Operating Instructions Manual Download Page 354

Page: 354 / 419

Color Printing Using the Optional Color Drum

CCCC

Pull out the drum unit handle.

Note

❒

If you cannot pull out the drum
unit, push the drum unit han-
dle, then pull out the drum unit.

DDDD

Hold the rail on the drum and
slide out the drum while pulling
the release towards you.

EEEE

Remove the drum unit from the
machine while holding the upper
drum stay.

Note

❒

Be careful not to let the drum
unit fall.

FFFF

Insert the color drum unit along
the guide rail.

GGGG

Slide in the drum unit until it
locks in position.

HHHH

Lower the drum unit lock lever.

IIII

Close the front door.

Note

❒

Make sure that the open cov-
er/unit indicator (

) turns off,

and the “Color” is displayed on
the operation panel.

PinkGold-F_V4_FM.book Page 51 Tuesday, September 11, 2001 6:31 PM

Summary of Contents for Priport JP1030




































































































































































































































































































































































































































Search results

Summary of Contents for Priport JP1030

Reviews:

Related manuals for Priport JP1030

Brands by name

Popular brands

Ricoh Priport JP1030, Operating Instructions Manual

Search results

Summary of Contents for Priport JP1030

Reviews:

Related manuals for Priport JP1030

Brands by name

Popular brands