Ricoh Priport JP1030 Operating Instructions Manual Download Page 31

Page: 31 / 419

OPERATION

Press the

{{{{

Proof

}}}}

key and check

the image density and the image
position of the proof print.

Note

❒

If the image position is not cor-
rect, adjust it using the

{

Image

Position

}

keys or the fine adjust-

ment dial. See

⇒

P.8

“Adjusting

The Print Image Position”

❒

If the image density is slightly
dark or light, adjust the image
density using the

{W}

{V}

key. See

⇒

P.10

“Adjusting The

Print Image Density”

Enter the number of prints re-
quired with the

{{{{

Number

}}}}

keys.

Note

❒

Up to 9999 prints can be entered
at one time.

❒

To change the number entered,
press the

{

Clear/Stop

}

key and

enter the new number.

Press the

{{{{

Print

}}}}

key.

Note

❒

After printing is completed, the
same number of prints is auto-
matically set for the next job.

❒

To stop the machine during the
multi-print run, press the

{

Clear/

Stop

}

key.

❒

To return the machine to the ini-
tial condition after printing,
press the

{

Clear Modes

}

key.

TSLS013N

TSLS011N

TSLS014N

Summary of Contents for Priport JP1030




































































































































































































































































































































































































































Search results

Summary of Contents for Priport JP1030

Reviews:

Related manuals for Priport JP1030

Brands by name

Popular brands

Ricoh Priport JP1030, Operating Instructions Manual

Search results

Summary of Contents for Priport JP1030

Reviews:

Related manuals for Priport JP1030

Brands by name

Popular brands