Ricoh Priport JP1030 Operating Instructions Manual Download Page 221

Page: 221 / 419

Color Printing Using the Optional Color Drum

Pull out the drum unit handle.

Note

❒

If you cannot pull out the drum
unit, push the drum unit han-
dle, then pull out the drum unit.

Hold the rail on the drum and
slide out the drum while pulling
the release towards you.

Remove the drum unit from the
machine while holding the upper
drum stay.

Note

❒

Be careful not to let the drum
unit fall.

Insert the color drum unit along
the guide rail.

Slide in the drum unit until it
locks in position.

Lower the drum unit lock lever.

Close the front door.

Note

❒

Make sure that the

Cover Open

indicator (

) turns off, and the

COLOR

is shown in the guid-

ance display.

TSLH01LE

TSLH01FE

TSLH01GE

TSLH01PE

TSLH01HE

TSLH027E

SilverV-EN.book Page 53 Monday, May 15, 2000 3:23 PM

Summary of Contents for Priport JP1030




































































































































































































































































































































































































































Search results

Summary of Contents for Priport JP1030

Reviews:

Related manuals for Priport JP1030

Brands by name

Popular brands

Ricoh Priport JP1030, Operating Instructions Manual

Search results

Summary of Contents for Priport JP1030

Reviews:

Related manuals for Priport JP1030

Brands by name

Popular brands