Ricoh Priport JP1030 Operating Instructions Manual Download Page 137

Page: 137 / 419

REMARKS

112

Maintaining Your Machine

To maintain high print quality, clean
the following parts and units regular-
ly.

Main Frame

Exposure Glass

Lift the platen cover or document
feeder.

Clean the exposure glass with a
damp cloth and wipe it with a dry
cloth.

Note

❒

If you do not clean the exposure
glass, marks on the glass will be
printed.

Platen Cover

Lift the platen cover.

Clean the platen cover with a
damp cloth and wipe it with a dry
cloth.

Note

❒

If you do not clean the platen
cover, marks on the cover will
be printed.

Paper Feed Roller (paper feed table)

Wipe off the paper dust on the pa-
per feed roller with a damp cloth,
then wipe it with a dry cloth.

Note

❒

If you do not clean the paper
feed roller, paper misfeeds tend
to occur.

TSLH019E

TSLH015E

TSLH017E

Summary of Contents for Priport JP1030




































































































































































































































































































































































































































Search results

Summary of Contents for Priport JP1030

Reviews:

Related manuals for Priport JP1030

Brands by name

Popular brands

Ricoh Priport JP1030, Operating Instructions Manual

Search results

Summary of Contents for Priport JP1030

Reviews:

Related manuals for Priport JP1030

Brands by name

Popular brands