Ricoh Priport JP1030 Operating Instructions Manual Download Page 406

Page: 406 / 419

Maintaining the Machine

103

Maintaining the Machine

To maintain high print quality, clean
the following parts and units regular-
ly.

Main Frame

Exposure Glass

AAAA

Lift the exposure glass cover or
optional document feeder.

BBBB

Clean the exposure glass with a
damp cloth and wipe it with a dry
cloth.

Note

❒

If you do not clean the exposure
glass, marks on the glass will be
printed.

Exposure Glass Cover

AAAA

Lift the exposure glass cover.

BBBB

Clean the exposure glass cover
with a damp cloth and wipe it
with a dry cloth.

Note

❒

If you do not clean the exposure
glass cover, marks on the cover
will be printed.

Paper Feed Roller (paper feed tray)

AAAA

Wipe off the paper dust on the pa-
per feed roller with a damp cloth,
then wipe it with a dry cloth.

Note

❒

If you do not clean the paper
feed roller, paper misfeeds tend
to occur.

ZDCH130E

AM1P0100

PinkGold-F_V4_FM.book Page 103 Tuesday, September 11, 2001 6:31 PM

Summary of Contents for Priport JP1030




































































































































































































































































































































































































































Search results

Summary of Contents for Priport JP1030

Reviews:

Related manuals for Priport JP1030

Brands by name

Popular brands

Ricoh Priport JP1030, Operating Instructions Manual

Search results

Summary of Contents for Priport JP1030

Reviews:

Related manuals for Priport JP1030

Brands by name

Popular brands