Ricoh Priport JP1030, Operating Instructions Manual

Page: 48 / 419

Selecting Original Type
23
1
Selecting Original Type
Select one of the following three types
to match your originals:
❖ ❖ ❖ ❖
Photo mode
Delicate tones of photographs and
pictures can be reproduced with
this mode.
❖
❖ ❖
❖
Letter mode
Select this mode when your origi-
nals contain only letters (no pic-
tures).
❖ ❖ ❖ ❖
Letter/Photo mode
Select this mode when your origi-
nals contain photographs or pic-
tures with letters.
Note
❒
Moire patterns might occur when
screened originals are printed.
❒
When using Photo mode to print
originals with both letter and pho-
tographs, the letter will appear
lighter. To avoid this, select Let-
ter/Photo mode with the
{
Type of
Original
}
key.
A
Press the
{{{{
Type of Original
}}}}
key to
select Photo mode.
B
Press the
{{{{
Image Density
}}}}
key to
adjust the image density.
C
Set your originals on the exposure
glass or in the optional document
feeder.
D
Press the
{{{{
Start
}}}}
key.
E
Check the image position of the
trial or proof print.
Note
❒
If the image position is not cor-
rect, adjust it using the
{
Image
Position
}
keys (see
⇒
P.8 “Shift-
ing The Print Image Position For-
ward Or Backward”
) or the side
table fine adjusting dial (see
⇒
P.8 “Shifting The Print Image Po-
sition To The Right Or Left” ).
F
Make your prints.
TSLS01EN
TSLS016N
TSLS012N