Ricoh Priport JP1030 Operating Instructions Manual Download Page 61

Page: 61 / 419

OPERATION

Program—Storing Your Print Settings In
Memory

You can store up to 9 frequently used
print job settings in machine memory,
and recall them for future use.

Note

❒

The stored programs are not
cleared when you turn off the main
switch.

❒

The stored programs cannot be de-
leted. If you want to change a
stored program, overwrite it.

Storing Your Settings

Set the print settings you want to
put into memory.

Press the

{{{{

Program

}}}}

key.

Numbers already containing a
program are displayed on the
guidance display.

Enter “0” with the

{{{{

Number

}}}}

keys.

Press the

{{{{

}}}}

key.

Note

❒

The program numbers (1 to 9)
will be displayed in the guid-
ance display.

❒

If a user program has been pro-
tected, that program number
will not appear in the display.
For how to change a protected
user program, see

⇒

P.38

“Pro-

tecting A Program”

❒

If all the user programs have
been protected, the machine re-
turns to the ready condition.

TSLS01KN

TSLS011N

TSLS01TN

Summary of Contents for Priport JP1030




































































































































































































































































































































































































































Search results

Summary of Contents for Priport JP1030

Reviews:

Related manuals for Priport JP1030

Brands by name

Popular brands

Ricoh Priport JP1030, Operating Instructions Manual

Search results

Summary of Contents for Priport JP1030

Reviews:

Related manuals for Priport JP1030

Brands by name

Popular brands