Ricoh Kr-P2, Field Service Manual

Page: 159 / 200

5828 156 IPv6Manual Address
This SP is the IPv6 manually set address referenced on the
Ethernet or wireless LAN (802.11) in the format:
"Manual Set Address" + "Prefix Length"
The IPv6 address consists of a total 128 bits configured in 8
blocks of 16 bits each. These notations can be abbreviated.
See "Note: IPV6 Addresses" below this table.
5828 158 IPv6 Gateway Address
This SP is the IPv6 gateway address referenced on the Ethernet
or wireless LAN (802.11). The IPv6 address consists of a total
128 bits configured in 8 blocks of 16 bits each. These notations
can be abbreviated. See "Note: IPV6 Addresses " below this
table.
5828 161 IPv6 Statelss Auto
Enables or disables the IPv6 Stateless Auto setting on the
Ethernet or wireless LAN (802.11).
0: Off, 1: On
Note: IPV6 Addresses
Ethernet and the Wireless LAN (802.11) reference the IPV6 "Link-Local a Prefix Length". The IPV6
address consists of 128 bits divided into 8 blocks of 16 bits:
aaaa:bbbb:cccc:dddd:eeee:ffff:gggg:hhhh:
The prefix length is inserted at the 17th byte (Prefix Range: 0x0to0x80). The initial setting is 0x40(64).
For example, the data:
2001123456789012abcdef012345678940h
is expressed:
2001:1234:5678:9012:abcd:ef01:2345:6789: prefixlen 64
However, the actual IPV6 address display is abbreviated according to the following rules.
Rules for Abbreviating IPV6 Addresses
1. The IPV6 address is expressed in hexadecimal delimited by colons (:) with the following characters:
0123456789abcdefABCDEF
2. A colon is inserted as a delimiter every 4th hexadecimal character.
fe80:0000:0000:0000:0207:40ff:0000:340e
3. The notations can be abbreviated by eliminating zeros where the MSB and digits following the MSB
are zero. The example in "2" above, then, becomes:
fe80:0:0:0207:40ff:0:340e
4. Sections where only zeros exist can be abbreviated with double colons (::). This abbreviation can be
done also where succeeding sections contain only zeros (but this can be done only at one point in
SP Tables
61
3