Ricoh Kr-P2, Field Service Manual

Page: 175 / 200

5860 026
S/MIVE: MIME Header Setting
Selects the MIME header type of an E-mail sent by S/MIME.
[0 to 2 / 0 / 1]
0: Microsoft Outlook Express standard
1: Internet Draft standard
2: RFC standard
5866 E-Mail Report
001 Report Validity
Enables or disables the E-mail alert function.
[0 or 1 / 0 / – ] 0: Enabled, 1: Disabled
005 Add Date Field
Adds or does not add the date field to the header of the alert mail.
[0 or 1 / 0 / – ]
0: Not added, 1: Added
5869 RAM disk setting DFU
5870
Common KeyInfo Writing
Writes to flash ROM the common proof for validating the device for @Remote
specifications.
Note:
• These SP settings are required to connect @Remote or must also be set after the
board is replaced.
• Even if @Remote is not connected, these settings are used for Web validation, so at
least SP5870 003 must be enabled.
5870 001 Writing Writes the authentication data (used for NRS) in the memory.
5870 003 Initialize Initializes the authentication data in the memory.
5873
SDCardAppliMove
Allows you to move applications from one SD card another. For more, please refer to the
"SD Card Application Move" section.
5873 001 MoveExec Executes the move from one SD card to another.
SP Tables
77
3