Ricoh Kr-P2, Field Service Manual

Page: 121 / 200

004 Bit Switch 4 DFU 0 1
bit 0 DFU - -
bit 1 DFU - -
bit 2 DFU - -
bit 3 IPDS print-side reversal 0: Disable 1: Enable
If enabled, the simplex pages of IPDS jobs will be printed on the front side because of
printing on the back side of the page. This might reduce printing speed.
bit 4 DFU - -
bit 5 DFU - -
bit 6 DFU - -
bit 7 DFU - -
1001 Bit Switch
005 Bit Switch 5 0 1
bit 0 DFU - -
bit 1 Multiple copies if a paper size or type mismatch
occurs 0: Disable
(Single
copy)
1: Enable
(Multiple copy)
If a paper size or type mismatch occurs during the printing of multiple copies, only a
single copy is output by default. Using this BitSw, the device can be configured to print
all copies even if a paper mismatch occurs.
bit 2 Prevent SDK applications from altering the contents
of a job.
0: Disable 1: Enable
If this BitSw is enabled, SDK applications will not be able to alter print data. This is
achieved by preventing SDK applications from accessing a module called the "GPS
Filter".
Note: The main purpose of this BitSw is for troubleshooting the effects of SDK
applications on data.
SP Tables
23
3