Ricoh Kr-P2, Field Service Manual

Page: 79 / 200

5. System Maintenance Reference
Service Program Mode
SP Tables
See "Appendices" for the following information:
• Printer Controller Service Mode Tables
• Engine Mode Tables
• Before accessing the service menu, do the following:
• Confirm that there is no print data in the printer buffer (the Data In LED must not be lit or blinking).
• If there is some data in the buffer, wait until all data has been printed.
Inputting a Value or Setting for a Service Program
Enter the required program mode as explained above. The setting appearing on the display is the current
setting.
Select the required setting using the "Up/Down arrow" keys [A], then press the "OK" key [B]. The previous
value remains if the "OK" key [B] is not pressed.
77
5