Ricoh Kr-P2, Field Service Manual

Page: 125 / 200

• [ ] [ ]: Move to the next bit.
• [Escape]: Exit without saving changes.
• [Enter]: Exit and save changes.
• The left digit on the display is bit 7 and the right digit is bit 0.
4. Press [Enter] to save changes and exit.
Printer Engine Service Mode
Service Mode Table
Notation What it means
[range / default / step]
Example: [-9 to +9 / 3.0 / 0.1 mm step]. The setting can be adjusted
in the range
±
9, value reset to +3.0 after an NVRAM reset, and the
value can be changed in 0.1 mm steps with each key press.
Bold Comments added for reference.
DFU Denotes "Design or Factory Use". Do not change this value.
Japan only The feature or item is for Japan only. Do not change this value.
SP1-xxx: Feed
1001
Lead Edge Regist
Adjusts the printing leading edge registration for feeding from the trays and duplex tray
using the trimming area pattern (SP5-902-003 No.9).
Push [ ] or [ ] to select the settings (plus or minus).
The specification is 4±2 mm
SP Tables
27
3