Ricoh Kr-P2, Field Service Manual

Page: 122 / 200

bit 3 [PS] PS Criteria 0: Pattern3 1: Pattern1
Change the number of PS criterion used by the PS interpreter to determine whether a
job is PS data or not.
Pattern3: includes most PS commands.
Pattern1: A small number of PS tags and headers
bit 4 Increase max number of the stored jobs to 1000
jobs. 0: Disable
(100)
1: Enable
(1000)
Enable: Changes the maximum number of jobs that can be stored on the HDD via Job
Type settings to 1000. The default is 100.
bit 5 DFU - -
bit 6 Method for determining the image rotation for the
edge to bind on.
0: Disable 1: Enable
If enabled, the image rotation will be performed as they were in the specifications of
older models for the binding of pages of mixed orientation jobs.
The old models are below:
- PCL: Pre-04A models
- PS/PDF/RPCS:Pre-05S models
bit 7
Letterhead mode printing 0: Disable
1: Enable
(Duplex)
Routes all pages through the duplex unit.
If this is disabled, simplex pages or the last page of an odd-paged duplex job, are not
routed through the duplex unit. This could result in problems with letterhead/pre-printed
pages.
Only affects pages specified as Letterhead paper.
1001 Bit Switch
006 Bit Switch 6 0 1
bit 0
to 5
DFU - -
3. Appendix: SP Mode Tables
24
3