21 December, 2001
SERVICE PROGRAM MODE
3-5
Service
Tables
2
Mode No.
Function
G3-1 NCU Parameters
103
001 – 023
CC, 01 – 22
NCU parameter settings for the standard
G3 board.
☛
Section 3.3 NCU Parameters
G3-2 NCU Parameters
104
001 – 023
CC, 01 – 22
NCU parameter settings for the optional G3
board.
☛
Section 3.3 NCU Parameters
SP3-XXX (Tel Line Settings)
3
Mode No.
Function
Service Station
001
Fax Number
Enter the fax number of the service station.
101
002
Select Line
Select the line type.
Serial Number
102
000
Enter the fax unit’s serial number.
PSTN-1 Port Settings
001
Select Line
Select the line type setting for the G3-1 line.
If the machine is installed on a PABX line,
select “PABX”, “PABX(GND)” or
“PABX(FLASH)”.
002
PSTN Access Number
Enter the PSTN access number for the
G3-1 line.
003
Memory Lock
Disabled
If the customer does not want to receive
transmissions using Memory Lock on this
line, turn this SP on.
103
004
Transmission
Disabled
If you turn this SP on, the machine does not
send any fax messages on the G3-1 line.
PSTN-2 Port Settings
001
Select Line
Select the line setting for the G3-2 (optional
extra G3) line. If the machine is installed on
a PABX line, select “PABX”, “PABX(GND)”
or “PABX(FLASH)”.
002
PSTN Access Number
Enter the PSTN access number for the G3-
2 line.
003
Memory Lock
Disabled
If the customer does not want to receive
transmissions using Memory Lock on this
line, change this SP to on.
104
004
Transmission
Disabled
If you turn this SP on, the machine does not
send any fax messages on the G3-2 line.
ISDN Port Settings
001
Select Line
Select the line setting for the ISDN line. If
the machine is installed on a PABX line,
select “PABX”.
002
PSTN Access Number
Enter the PSTN access number for ISDN
line.
003
Memory Lock
Disabled
If the customer does not want to receive
transmissions using Memory Lock on this
line, change this SP to on
106
004
Transmission
Disabled
If you turn this SP on, the machine does not
send any fax messages on the ISDN line.
