BIT SWITCHES
21 December, 2001
3-38
Communication Switch 16
SP No. 1-104-023
No
FUNCTION
COMMENTS
0
Standard G3 unit
0:
Disabled
1:
Enabled
Set this bit to 0 if the user wants to use only the
ISDN line (option G4 unit), even for G3
communications. However, for ISDN on hook
dialing, bit 7 of user parameter 30 must be set to 1.
Note:
If the optional G4 unit is not installed, but this
bit is changed to ‘disabled’, no document can be
transmitted.
1
Optional G3 unit (G3-2)
0:
Not installed
1:
Installed
Change this bit to 1 when installing the first optional
G3 unit.
2
Optional ISDN unit
0:
Not installed
1:
Installed
Change this bit to 1 when installing the optional
ISDN unit.
3-5
Not used
Do not change the settings.
6
Use of the I-G3 line
0:
Tx or rx
1:
Tx only
Change this bit to 1 when the customer requires.
7
G4 Dual communication
0:
Enabled
1:
Disabled
1:
The machine uses only one B channel for
communication. This enables a customer to
occupy another B channel for other purposes
such as internet communication.
Communication Switch 17
SP No. 1-104-024
No
FUNCTION
COMMENTS
0
SEP reception
0:
Disabled
1:
Enabled
0:
Polling transmission to another maker’s machine
using the SEP (Selective Polling) signal is
disabled.
1
SUB reception
0:
Disabled
1:
Enabled
0:
Confidential reception to another maker’s
machine using the SUB (Sub-address) signal is
disabled.
2
PWD reception
0:
Disabled
1:
Enabled
0:
Disables features that require PWD (Password)
signal reception.
3-6
Not used
Do not change the settings.
7
Action when there is no box
with an F-code that matches
the received SUB code
0:
Disconnect the line
1:
Receive the message
(using normal reception mode)
Change this setting when the customer requires.
