21 December, 2001
BIT SWITCHES
3-21
Service
Tables
System Switch 1F
SP No. 1-101-032
No
FUNCTION
COMMENTS
0
Not used
Do not change the settings.
1
Report printout after an original
jam during SAF storage or if
the SAF memory fills up
0:
Enabled
1:
Disabled
0:
When an original jams, or the SAF memory
overflows during scanning, a report will be
printed.
Change this bit to “1” if the customer does not want
to have a report in these cases.
Memory tx – Memory storage report
Parallel memory tx – Transmission result report
2
Not used
Do not change the settings.
3
Received fax print start timing
(G3 reception)
0:
After receiving each page
1:
After receiving all pages
4
Received fax print start timing
(G4 reception)
0:
After receiving each page
1:
After receiving all pages
0:
The machine prints each page immediately after
the machine receives it.
1:
The machine prints the complete message after
the machine receives all the pages in the
memory.
5-6
Not used
Do not change the factory settings.
7
Action when a fax SC has
occurred
0:
Automatic reset
1:
Fax unit stops
0:
When the fax unit detects a fax SC code other
than SC1201 and SC1207, the fax unit
automatically resets itself.
1:
When the fax unit detects any fax SC code, the
fax unit stops.
Cross Reference
Fax SC codes - See “Troubleshooting”
