Ricoh G091, Service Manual

Page: 86 / 298

PRINTER ENGINE SERVICE MODE [ALL MODELS]
G112/G113/G116/G094/G095/G091 5-4 SM
Fusing start Normal , Roller turn DFU 1910
Roller turn: Warms up the fusing unit for 20 s just after the power switch has
been turned on or when the machine warms up from energy saver mode.
Normal: There is no 20 s warm-up period. However, just after the main power
switch is turned on, the motor turns to clean the drum.
NOTE: This SP mode is effective only when the internal
temperature is less than 15 C.
Warm up control Normal , Curl control 1912
G116
G091
Only
Lowers the fusing temperature (to 150°C) to prevent thin paper from curling.
Use this mode only when a paper jam occurs during duplex rear side printing.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA