Ricoh G091, Service Manual

Page: 83 / 298

SERVICE PROGRAM MODE [ALL MODELS]
SM 5-1 G112/G113/G116/G094/G095/G091
Service
Tables
5. SERVICE TABLES
5.1 SERVICE PROGRAM MODE [ALL MODELS]
NOTE: Differences that are machine specific are noted in the margin with the
machine code.

CAUTION
Do these before you go into the service program mode:
•
Make sure there is no print data in the printer buffer (the Data In LED must
not be lit or blinking).
•
If there is some data in the buffer, wait until all data has been printed.
5.1.1 ENABLING AND DISABLING SERVICE PROGRAM MODE
Entering the Service Mode
There are two ways to enter the service
mode.
Method 1: Turn the machine on while
pressing the “On Line” key and “Escape”
key together until “1. Service Menu1”
appears on the display.
NOTE: If you switch the machine off, any
jobs stored on the hard disk using
the sample print and protected print
features will be deleted.
Check first with the user tools to
see if there are any jobs stored with
these features
(Menu key - Sample Print, or
Protected Print).
Method 2: Press the “Up/Down arrow” keys
together for about 5 seconds, then press
the “Enter” key.
“1. Service Menu1” appears on the display.
NOTE: The machine automatically goes off line when you enter the service mode
Inputting a Value or Setting for a Service Program
Enter the required program mode as explained above. The setting appearing on
the display is the current setting.
Select the required setting using the “Up/Down arrow” keys, then press the “Enter”
key. The previous value remains if the “Enter” key is not pressed.
Menu
Escape
#
Enter
On Line
Job Reset
Form Feed
Power Error Data In
G094S509.WMF
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA