Ricoh G091, Service Manual

Page: 162 / 298

CONTROLLER FUNCTIONS [ALL MODELS]
G112/G113/G116/G094/G095/G091 6-38 SM
6.6 CONTROLLER FUNCTIONS [ALL MODELS]
6.6.1 METER CHARGE MODE
Meter-charge Counter Display
When meter charge mode (engine SP 5930) is
switched on, the meter-charge counter menu is the first
item shown on the user menu.
(The “Sample Print” menu appears first when the meter-charge mode is switched
off.)
NOTE: The default setting for this machine is meter-charge mode off.
The meter-charge counter is not the same as the PM counter. This is because, in
the following cases, the meter-charge counter does not count up.
• Blank rear side during duplex printing
•
Blank page when using the “Cover Page” or “Two in One” features
•
Service reports
NOTE: The meter-charge counter cannot be reset.
PM Warning Display
When meter charge mode (engine SP 5930) is switched on, “Replace Maintenance
Kit” will not be displayed at 90k prints.
Item Meter-charge On Meter-charge Off Remarks
Meter-charge
counter Shown as the first
item in the user menu
Not shown User menu
PM Warning Not shown
“Replace Maintenance
Kit” displayed at 90k
prints
PM Service Customer
PM Counter Reset manually
Automatically reset
when the fusing unit is
replaced using the
maintenance kit
Printer engine
service mode “PM
counter”
Menu:
Counter
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA