Ricoh G091, Service Manual

Page: 100 / 298

PRINTER ENGINE SERVICE MODE [ALL MODELS]
G112/G113/G116/G094/G095/G091 5-18 SM
5869 RAM disk setting DFU
5870 Common Key Info. Common key information writing
5870 1 Writing Writes the authentication data (used for NRS) in
the memory.
5870 3 Initialize Initializes the authentication data in the memory.
5873 SD Card Appli Move
5873 1 Move Exec 5.11.2
5873 2 Undo Exec 5.11.3
5876 Security Clear
5876 1 All Clear
5876 11 Clear NCS Security
5876 15 Clear UCS Security
5886
[
ROM Update] 0: YES, 1: No
5886 1 Allows the ROM firmware to be updated remotely via the local network.
(Default = Yes)
NOTE: The settings can be changed via Web Image Monitor.
Test print 5902
Prints the test pattern that you selected with SP 2902.
1 sheet test
5902 1
Prints one copy of the test pattern
Cont test
5902 2
Prints consecutive copies of the test pattern
Plug & Play 5907
Sets the brand name and the production name for Windows Plug & Play. This
information is stored in NVRAM. If the NVRAM is defective or has been
replaced, these names should be registered again.
To set the plug and play model name, enter the model number, and then
press
.
Rev. 12/2005
⇒
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA