Ricoh G091, Service Manual

Page: 95 / 298

PRINTER ENGINE SERVICE MODE [ALL MODELS]
SM 5-13 G112/G113/G116/G094/G095/G091
Service
Tables
Fusing err clear 5810
Resets a service call condition (for fusing unit errors).
After using this SP mode, turn the main switch off and on.
Serial Number DFU 5811
Used to input the machine serial number. This is normally done at the factory.
If you want to know the serial number, print the system parameter list. Press

and then input “A”.
Service Tel. No. Setting 5812
Use these SP modes to input service and support telephone numbers. Enter
the number and press
Press the

key to input a pause. Press the “Clear modes” key to delete the
telephone number.
5812 1 Tel No. Use this to input the telephone number of the
CE printed on the SP print mode printout.
5812 2 Fax Use this to input the fax number of the CE
printed on the SP print mode printout.
5816 Remote Service
5816 1 I/F Setting [0 to 2 / 2 / 1/step] Alphanumeric
0: Off, 1: CSS
2: Network (The remote service function is on.)
5816 2 CE Call [0 to 1 / 1 / 1/step]
0: Start, 1: End
5816 3 Function Flag [0 to 1 / 0 / 1/step]
0: Off (The remote service function is disabled.)
1: On (The remote service function is enabled.)
5816 4 Communication Test Does a communication test. One of the return
codes from 0 to 99 is shown:
•
0: Normal end (The service is operating.)
•
1: Normal end (The service is not operating.)
•
Any other code: Abnormal end
Do the test from the User Tools. Do not use SP
5816 4 unless you are told to do it by the
manufacturer.
5816 5 Device Information DFU
5816 6 Device Information
Shows or does not show the device information
in the User Tools.
[0 to 1 /
0 / 1/step]
0: Not displayed, 1: Displayed
5816 7 SSL Disable [0 to 1 / 0 / 1/step]
0: On, 1: Off
5816 8 RCG Connect Time Sets the timeout counter for the remote
connection.
[1 to 90 /
10 / 1 second/step]
5816 9 RCG Write Timeout Sets the timeout counter for writing processing.
[0 to 100 /
60 / 1 second/step]
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA