Ricoh G091 Service Manual Download Page 205

Page: 205 / 298

SPECIFICATIONS

(G112/G113)

SM 7-41

G112/G113/G116/G094/G095/G091

Specifica

tio

8. MACHINE CONFIGURATION

8.1 SYSTEM COMPONENTS

Item Machine

Code

No.

Remarks

Main Unit

G112
G113

The NIB option is built into the G113
model but not for the G112 model.

Optional Units

Duplex Unit

G361

Paper Tray Unit

G360

C, D Up to two tray units can be installed.

Envelope Feeder

G362

If both optional paper trays are
installed, the envelope feeder must
go in the top tray.

NOTE:

The user can install all of the above items.

G112V205.WMF

[A]

[B]

[C]

[E]

[D]

CÓPIA NÃO CONTROLADA

Summary of Contents for G091











































































































































































































































































































Search results

Summary of Contents for G091

Reviews:

Related manuals for G091

Brands by name

Popular brands

Ricoh G091, Service Manual

Search results

Summary of Contents for G091

Reviews:

Related manuals for G091

Brands by name

Popular brands