Ricoh G091, Service Manual

Page: 97 / 298

PRINTER ENGINE SERVICE MODE [ALL MODELS]
SM 5-15 G112/G113/G116/G094/G095/G091
Service
Tables
5828 91 Web Enables or disables the Web monitor.
[0 to 1 /
1 / 1/step]
0: Disabled, 1: Enabled
5832 HDD Init
Initializes the hard disk.
Use this only if there is a hard disk error.
Prog checksum 5837
Displays the checksum for the engine firmware.
5839 IEEE1394
IP Address
5839 001
This is the IP address used for IP over 1394.
Subnet mask
5839 002
This is the subnet mask used for IP over 1394.
5839 003 Physical address DFU
5839 004 Host name DFU
5839 007 Cycle master DFU
5839 008 BCR mode DFU
5839 009 IRM 1394a check DFU
5839 010 Unique ID DFU
5839 011 Logout DFU
5839 012 Login DFU
5839 013 Login max DFU
5840 IEEE802.11b
Current SSID
5840 04
Enters a unique ID (up to 32 characters long) to identify the device.
5840 06 Channel max DFU
5840 07 Channel min DFU
WEP key number 5840 11
Selects the WEP key number
5840 18 SSID key check DFU
WEP mode 5840 20
Sets the type of WEP key (64-bit or 128-bit).
5842 NFA Analysis
Prints or does not print the module log for each bit.
[0 to 1 /
1 / 1/step]
0: Prints, 1: Not print
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA