Ricoh G091, Service Manual

Page: 90 / 298

PRINTER ENGINE SERVICE MODE [ALL MODELS]
G112/G113/G116/G094/G095/G091 5-8 SM
SP5-xxx: Mode
mm/inch Display Selection 0: Europe/Asia (mm), 1: North America (inch) 5024
Selects the unit of measurement.
After selection, turn the main power switch off and on.
5046 ROM Update Disp
Enables or disables the ROM Update utility.
When enabled, this utility will be displayed in the
user program mode.
DFU
[0 or 1 / 1 / –]
•
0: Enabled
1: Disabled
5055 [Display IP Address] 0: NO, 1: Yes
5055 1 Displays the LP’s IP Address on the display panel. (Default = NO)
5104
G091
G116
Only A3/11x17 Count Specifies whether the counter is doubled for
A3/11" x 17" paper. If “Yes” is selected, the total
counter counts up twice when A3/11" x 17" paper
is used.
Yes
No
(double count) (single count)
5302 Set Time
[-1440
∼
1440 / Montreal: -300 /1 minute/step]
DFU
Adjusts the RTC (real time clock) time setting. Sets the local time. (Montreal: -
300, Paris: + 60, Beijing: +480, Taipei: +480, Hong Kong: +480)
5305 Auto Off Set
Switches energy saver mode on/off
Enable , Disable
Enable: Energy saver mode will be used
Disable: Energy saver mode will be ignored
5307 Summer time
5307 1 Setting Enables or disables the summer time mode.
[0 to 1 /
0 / -] Alphanumeric
0: Off, 1: On
5307 3 Rule set (Start) Specifies the start of the daylight saving time.
5307 4 Rule set (End) Specifies the end of the daylight saving time
U limit auto select Yes , No 5401
Determines whether the machine adds new user codes in the User
Management Tool in Smart Net Monitor.
5404 [UcodeCtrClr] User Code Counter Clear
5404 1 UcodeCtrClr Clears all counters for users.
⇒
Rev. 10/2005
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA