Ricoh G091, Service Manual

Page: 289 / 298

DETAILED DESCRIPTIONS
SM 3 G399/G807
Paper Tra
y
Unit G399
Envelope
F
ee
d
er
G
807
2.2.6 PAPER PRESSURE SWITCH
The paper pressure switches [A] slide from left to right and from right to left. The
switch is used to increase upward pressure on the paper from the bottom plate.
This helps to prevent paper misfeeds.
Do this procedure to use the paper pressure switch:
1) Remove the two plastic latch covers [C].
• Be very careful when you remove these latches. They break very easily.
•
Use a small screwdriver to remove the latches.
2) Slide the paper tension switches [A] away from the center of the paper tray
unit.
3) Replace the plastic latches [C]
The springs [B] increase the tension from the bottom plate when you move the
paper pressure switches. At this time more pressure is applied to the paper.
Only use this procedure if the customer complains about paper misfeeds,
especially double feed conditions. Otherwise the switch should not be used.
The default position is “not set”, or, both switches pushed toward the center of the
paper tray unit.
G399D101.WMF
[A]
[A]
[B]
[C]
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA