Ricoh G091, Service Manual

Page: 153 / 298

PAPER FEED [ALL MODELS]
SM 6-29 G112/G113/G116/G094/G095/G091
Detailed
Des
cription
s
6.4.3 BY-PASS TRAY [G091/G094/G095]
•
The by-pass paper sensor [A] detects when paper is placed on the tray.
• The CPU energizes the by-pass feed solenoid [B]. Then the by-pass feed roller
[C] starts to feed paper to the registration roller [D] through the relay roller [E].
• The by-pass feed roller shaft has two cams [F]. These cams release the bottom
plate to press the stack of paper against the feed roller.
• There is no width sensor.
NOTE: To prevent paper feed problems from too much friction between the feed
roller and friction pad, the feed roller contains a metal plate.
G094D103.WMF
G094D101.WMF
[A]
[B]
[C]
[D]
[E]
[F]
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA