21 May, 1999
BIT SWITCHES
4-23
Service
Tables
6
Memory reception if no RTI or
CSI received
0: Reception disabled
1: Reception enabled only
when there is no problem with
the printer mechanism
This switch setting is dependent on user
parameter switch 05 bit 1.
This Sw U.P.05 bit 1
--
0
:
Reception
always
enabled
0
1
:
Reception
disabled
1 1 : Reception enabled only there
is no problem with the printer
mechanism
7
Use of parallel memory
transmission with G4
transmission
0: Disabled 1: Enabled
This bit determines whether parallel
transmission can be used with a G4
transmission or not.
System Switch 12
No
FUNCTION
COMMENTS
0
to
7
TTI printing position in the
main scan direction
08 to 92 (BCD) mm. Only input even numbers.
This setting determines the TTI print start
position from the left edge of the paper. If the
TTI is too far to the right, the file number, which
is on the top right of the page, may obscure it.
System Switch 13 - Not used (do not change any of these settings)
System Switch 14 - Not used (do not change any of these settings)
System Switch 15
No
FUNCTION
COMMENTS
0
Not used
Do not change this setting.
1
Programming with European
characters
0: Disabled 1: Enabled
1: The user can program with European
characters (e.g. ”ä”, ”å”) for the TTI, Quick Dial
labels, etc.
2-7
Not used
Do not change these settings.
System Switch 16 - Not used (do not change any of these settings)
System Switch 17
No
FUNCTION
COMMENTS
0
Not used
Do not change this setting.
1
Direct fax number entry
0: Disabled 1: Enabled
0: The user must place the original on the ADF
before dialing.
2-4
Not used
Do not change these settings.
5
Inclusion of the Yes key when
Quick Dials are continuously
selected for destinations
0: Not needed
1: Needed
1: The user must press the Yes key after each
Quick Dial key. This is to prevent the user from
selecting incorrect destinations.
