![Ricoh FAX2900L Service Manual Download Page 112](http://html1.mh-extra.com/html/ricoh/fax2900l/fax2900l_service-manual_1456049112.webp)
BIT SWITCHES
21 May, 1999
4-32
Communication Switch 07
No
FUNCTION
COMMENTS
0
Fallback from G4 to G3 if the
other terminal is not a G4
terminal
0: Disabled 1: Enabled
Also see System Switch 0A bit 7.
Refer to the ISDN G4 option service manual (G4
Internal Switches 17, 18, 1A, 1B, and 1C) for the
CPS code set (Cause Value set) to determine
G4 to G3 fallback.
1
Not used
Do not change the setting.
2
Use of date and time provided
from the network for the CIL
0: Disabled 1: Enabled
0: The date and time programmed in the
receiving terminal is used in the CIL.
1: The date and time informed in the document
layer from the remote terminal (through the
network) is used in the CIL
3
Fallback from G4 to G3
reflected in programmed
Quick/Speed dials
0: Fallback enabled (Default)
1: Always start with G4
0: If a communication falls back from G4 to G3,
the machine will always start transmission with
G3 from the next communication.
1: The machine will always start to transmit with
G4.
4
Fallback from G4 to G3 when
G4 communication fails on the
ISDN B-channel
0: Fallback disabled (Default)
1: Fallback enabled
1: Enable this switch only when G4
communication errors occur because the
exchanger connects G4 calls to the PSTN.
This problem only occurs with some types of
exchanger.
5-7
Not used
Do not change the settings.
Communication Switch 08 - Not used (do not change any of these settings)
Communication Switch 09 - Not used (do not change any of these settings)
Communication Switch 0A
No
FUNCTION
COMMENTS
0
Memory transmission
resumption point for redialing
0: From the error page
1: From page 1
0: The transmission begins from the page where
transmission failed the previous time.
1: Transmission begins from the first page.
1-6
Not used
Do not change these settings.
7
Emergency calls using 999
0: Enabled 1: Disabled
If this bit is at 1, the machine will not allow you to
dial 999 at the auto-dialer.
Communication Switch 0B - Not used (do not change any of these settings)
Communication Switch 0C - Not used (do not change any of these settings)