21 May, 1999
SYSTEM FEATURES
2-35
Detailed
Descriptions
Sub-address (SUB/SID)
SUB Signal:
The SUB (sub-address) signal transmitted from the TX terminal contains a
confidential ID. A stored message can be printed using the SUB ID as a
confidential ID.
The SUB ID must contain four digits. The receiving terminal automatically
disconnects the line when any of the following conditions occur (error code 0-15):
•
When the SUB ID is other than four digits
•
When anything other than numbers is included in the ID
•
When a confidential ID is not programmed in the RX terminal and when the
transmitted SUB ID is 0000
A stored message can be printed using the (normal) confidential ID stored in the
machine when the SUB ID sent from the transmitter is 0000.
SID Signal:
When transmitted together with the SUB signal, the SID programmed is an ID code
for the confidential ID stored override.
NOTE: SID reception is disabled for this machine.
This machine automatically disconnects the line when it receives a SID
signal.
Cross-reference: Section 4.2 Bit Switches
Communication Bit Switch 17 Bit 1: SUB signal reception.
Tx
R x
C E D
N S F
D I S
S U B
N S S o r D C S
C F R
T C F
H547D561.WMF
