21 May, 1999
SERVICE LEVEL FUNCTIONS
4-11
Service
Tables
9. Turn off the machine and disconnect the copy tool. Then turn the machine back
on.
10. Print out the system parameter list and check the ROM version on it.
The following table shows the switch settings for each procedures using the
software copy tool.
Program Items
Switch Settings
Software download
On
Software upload
Off
SRAM data upload
Off
SRAM data download
Off
ISDN G4 software download
Off
4.1.24 SOFTWARE UPLOAD (FUNCTION 12)
This function copies software from the FCU inside the machine to an external
memory card.
1. Turn off the machine.
2. Connect the Flash memory card and the software copy tool as shown in the
previous section.
Note: The switch [D] on the tool must be at the OFF position.
3. Turn on the machine.
4.
òñ
ç
ì
ä
ä
å
then immediately press
ú
5.
ì
ë
ú
6.
ê
÷
If the software uploads successfully, the
display shows "OK".
If the software upload fails, the display shows
"NG".
7. Finish :
òñ
8. Turn off the machine and disconnect the tool. Then turn the machine back on
again.
FUNCTION KPAD/NEXT>
■■
SERVICE FUNCTIONS
0-SRAM 1-SAF
2-SAFCARD 3-M->R
OK!!
COPY MACH -> FLROM
NG!!
COPY MACH -> FLROM
