BIT SWITCHES
21 May, 1999
4-26
4.2.3 PRINTER SWITCHES
Printer Switch 00
No
FUNCTION
COMMENTS
0
Page separation mark
0: Disabled
1: Enabled
0: No marks printed.
1: If an incoming fax requires two sheets to print,
the machine prints an "x" inside a small box at
the bottom right hand corner of the first sheet.
Then, it prints a "2" inside a small box at the top
right hand corner of the second sheet. This
helps the user identify pages that have been
split up.
1
Repetition of data when the
received page is longer than
the printer paper
0: Disabled
1: Enabled
0: The next page continues from where the
previous page left off.
1: The final few mm of the previous page are
printed at the top of the next page.
See section 2.2.12 for details.
2-7
Not used
Do not change the settings.
Printer Switch 01
No
FUNCTION
COMMENTS
0
Reset the fusing unit failure
0: Off
1: On (Clear)
When a fusing error occurs, set this bit to 1 after
fixing the problem. The machine then resets the
fusing error. Switch the machine off/on and this
bit will reset itself to 0.
1-7
Not used
Do not change the settings.
Printer Switch 02
No
FUNCTION
COMMENTS
0
Paper Feed Priority
0: Paper feed unit >> Multi-
purpose feeder >> Standard
cassette
1: Paper feed unit >> Standard
cassette >> Multi-purpose
feeder
This bit determines which set of priorities the
machine uses for feeding the paper when all the
cassettes contain the same paper size.
2-7
Not used
Do not change these settings.
