Ricoh B022, Service Manual, Page: 784 / 878

Tech Service Bulletin No. B022/B027 – 015
Page 2 of 4
2. Configurations and Necessary Hardware:
Basic Printer Printer/Scanner FAX
Mainframe
✓ ✓ ✓ ✓
HDD Option
✓ ✓ ✓ ✓
64MB Memory Option
✓ ✓ ✓ ✓
NIB Option
✓ ✓ ✓ ✓
Printer Option -
✓
- -
Printer/Scanner Option - -
✓
-
Fax Option - - -
✓
•
Basic: Copier/Document Server
•
Printer: Basic + Printer
•
Printer/Scanner: Basic + Printer/Scanner
•
Fax: Basic + Fax
3. Necessary Firmware Upgrades for Mainframes/Options:
The table below shows the necessary firmware versions for each configuration.
Although part of the Capture function may work with older versions, to make full use of the function we
strongly recommend upgrading to the following:
Firmware Version Basic Printer Printer/Scanner FAX
Controller 5.18 ✓ ✓ ✓ ✓
LCDC 2.17 ✓ ✓ ✓ ✓
NCS(NIB) 1.78 ✓ ✓ ✓ ✓
NFA(Netfile) 2.20 ✓ ✓ ✓ ✓
Printer 2.02 - ✓ ✓ -
Scanner 2.05 - - ✓ -
Fax Application 5.08 - - - ✓
FCU 7.00 - - - ✓
Delivery Module -
✓
∗
-
✓
∗
∗
NOTE: When installing the individual Printer or FAX options, it is necessary to update the delivery module
in addition to the firmware. This is because the Printer/Scanner option firmware already contains the new
delivery module, which is automatically updated with the new firmware.
4. Necessary SP Settings:
SP Mode
4.1 SP5-836 -001 (Capture Function).
Enables/disables the Capture function.
When enabled, the settings screen for the function is displayed inside
System Settings.
0: Disabled (default) 1: Enabled
4.2 SP5-836 - 061 (Capture File Resend).
Enables/disables resending of previously captured files to eCabinet.
When enabled, if the client PC operator accesses a Captured file stored in eCabinet and sends it to the
B022/B027, the machine will resend this document to the eCabinet. This is to provide an extra safeguard
for file backup. However if users wish to minimize network traffic and free up eCabinet memory, this
function can be disabled.
Continued…