Ricoh B022, Service Manual, Page: 643 / 878

F
ax Un
it
B418
BIT SWITCHES
SM 3-21 B418
3.2.2 SCANNER SWITCHES
Scanner Switch 00 - Not used (do not change the settings)
Scanner Switch 01 SP No. 1-102-002
No FUNCTION COMMENTS
0-7 Scan density step value
(Text mode) When scan density is adjusted manually away from
the Normal setting, the threshold value for binary
picture processing changes for each step from the
value specified by Scanner Switch 02, by the
amount programmed here.
For example, with the default setting (14), the
threshold value changes as follows.
+3 (Darkest) :
71 (= 85 – 14)
+2 : 85 (= 99 – 14)
+1 : 99 (= 113 – 14)
0 (Normal) : 113 (Scanner Switch 02 setting)
-1 :
127 (= 113 + 14)
-2 : 141 (= 127 + 14)
-3 (Lightest) : 155 (= 141 + 14)
For smaller steps, input a lower value.
Scanner Switch 02 SP No. 1-102-003
No FUNCTION COMMENTS
0-7 Binary picture processing:
Threshold for Text mode -
Normal setting (center position) This setting determines the threshold value for
binary picture processing in Text mode (when the
scan density setting is at the center).
The value can be between 01 and FF. For a darker
threshold, input a lower value.
Default setting: 71(H) = 113(D)
Scanner Switch 03 - Not used (do not change the settings)
Scanner Switch 04 SP No. 1-102-005
No FUNCTION COMMENTS
0-7
Binary picture processing:
Threshold for monotone
background special original 1
mode - Normal setting (center
position) This setting determines the threshold value for
binary picture processing in monotone background
special original 1 mode (when the scan density
setting is at the center).
The value can be between 01 and FF. For a darker
threshold, input a lower value.
Default setting: A4(H) = 164(D)