Ricoh B022, Service Manual, Page: 597 / 878

FAX UNIT
B418 1-4 SM
5. Turn on the battery switch (SW1) [A] on the MBU board, then attach the FCU
unit [B] (6 screws). Connect the cables [C], then clamp the cable at [D] as
shown. Replace the rear cover and the small cover.
6. Remove parts [E], [G] and [J], then install parts [F], [H] and [I].
7. Attach the FCC decal [K] and the serial number decal [L] to the rear cover as
shown. Then install the small cover [M] on the rear cover.
8. Attach the super G3 decal [N] as shown.
B418I505.WMF
B418I607.WMF
B418I108.WMF
B418I106.WMF
[A]
[C]
[B]
[D]
[L]
[K]
[M
[N]
[E]
[F]
[G]
[H]
[I]
[J]