Ricoh B022, Service Manual, Page: 776 / 878

Serv
ic
e
Ta
b
le
s
SERVICE PROGRAM MODE
SM 4-39 B022/B027
834 Enable Operation Panel Image
Settings Enables and disables the operation panel read (dump)
feature. After powering on the machine, set this option
to 1 to enable this feature.
0 : Off (disable), 1: On (enable) DFU
To reset the machine to 0, the machine must be turned
off and on again. Selecting 0 for this option without
cycling the power off and on does not restore the
default setting (0).
1 Capture Function When enabled, the settings screen for the function is
displayed inside
[ System Settings ] .
[ 0= Disabled , 1= Enabled]
836*
61 Capture File Re-send Enables/disables resending of previously captured files
to eCabinet.
When enabled, if the client PC operator accesses a
Captured file stored in eCabinet and sends it to the
Russian-C2, the machine will resend this document to
the eCabinet. This is to provide an extra safeguard for
file backup. However if users wish to minimize network
traffic and free up eCabinet memory, this function can
be disabled.
[0= Disabled, 1= Enabled ]
Consumable Name 841*
Inputs the toner type (this is displayed in the inquiry
menu of UP mode).
Plug & Play Setting 907*
Sets the brand name and the production name for
Windows Plug & Play. This information is stored in
NVRAM. If the NVRAM is defective or has been
replaced, these names should be registered again.
To set the plug and play model name, enter the model
number, and then press
!
.
LCT Paper Size 908*
Selects the paper size for the LCT.
Use this SP after changing the paper size in the
optional LCT (i.e., after changing the side plate position
for the LCT).
[ 0 = A4 (Eur./Asia model) / 1 = LT (American model) ]
PCU Alarm Setting
1 Display Selects whether the PCU alarm message (Change
Photoconductor Unit) blinks when the PCU alarm
interval expires.
When installing the machine, if the customer requires
that the PCU alarm message blink, select “1”. If set to
“0”, there will be no message.
[0 = No / 1 = Yes ]
912*
2 Interval Sets the PCU alarm interval.
When the machine reaches this value, the PCU alarm
will be displayed on the LCD to inform the user. Only
used if SP5-912-1 is at “1”.
[1 ~ 255 / 60 / 1 k copies/step]
Application Counter Display 914*
1 Printer Selects whether the total counters for printer mode
⇒
Rev.10/2002