Ricoh B022, Service Manual, Page: 314 / 878

Rep
lac
emen
t
Ad
ju
s
tm
e
n
t
COPY ADJUSTMENTS: PRINTING/SCANNING
SM 6-37 B022/B027
Blank Margin
NOTE: If the leading edge/side-to-side registration cannot be adjusted within the
specifications, adjust the leading/left side edge blank margin.
1. Check the trailing edge and right side edge blank margins, and adjust them
using the following SP modes.
SP mode Specification
Trailing edge SP2-101-
2/3/4
3
±
2 mm
Right edge SP2-101-6 2 +2.5/-1.5 mm
Leading edge
SP2-101-1 3
±
2 mm
Left edge
SP2-101-5
2
±
1.5 mm
Trailing edge (duplex
copy, 2nd side) SP2-101-7
2
±
2 mm
Left edge (duplex
copy, 2nd side) SP2-101-8
2
±
1.5 mm
Right edge (duplex
copy, 2nd side) SP2-101-9 2 +2.5/-1.5 mm
A: Trailing Edge Blank Margin
B: Right Edge Blank Margin
C: Leading Edge Blank Margin
D: Left Edge Blank Margin
Main Scan Magnification
1. Print the single-dot grid pattern (SP2-902, no.5).
2. Check the magnification, and adjust the magnification using SP2-909 if
necessary. The specification is
±
1%.
D
C
B
A
B027R509.WMF