Ricoh Aficio 3035, Operating Instructions Manual

Page: 83 / 188

Enabling Authentication
75
5
E
Select [ Windows Authentication ] .
Note
❒
If you do not want to use user authentication management, select [ Off ] .
F
Press [ Change ] for “Domain Name”, enter the name of the domain controller
to be authenticated, and then press [ OK ] .
G
Select the "Printer Job Auth." level.
Note
❒
If you select [ Entire ] , you cannot print using a printer driver or a device that
does not support authentication. To print under an environment that does
not support authentication, select
[ Simple (All) ]
. By making this setting, only
registered users will be able to print.
❒
If you select [ Simple(Limitation) ] , you can specify clients for which printer job
authentication is not required. Specify [ Parallel Interface: Simple ] , [ USB: Sim-
ple ]
and the clients’ IP address range in which printer job authentication is
not required. Specify this setting if you want to print using unauthenticat-
ed printer drivers or without any printer driver. Authentication is required
for printing with non-specified devices.
❒
If you select [ Simple (All) ] , you can print even with unauthenticated printer
drivers or devices.Specify this setting if you want to print with a printer
driver or device that cannot be identified by the machine or if you do not
require authentication for printing.However, note that, because the ma-
chine does not require authentication in this case, it may be used by unau-
thorized users.
Reference
For details, see p.86 “Printer Job Authentication Levels and Printer Job
Types”.