Ricoh Aficio 3035, Operating Instructions Manual

Page: 66 / 188

Enhanced Network Security
58
4
G
Click [ OK ] .
[ Installed ]
appears under
[ Certificate Status ]
to show that a server certificate for
the machine has been installed.
H
Log off from the machine.
Enabling SSL
After installing the server certificate in the machine, enable the SSL setting.
This procedure is used for a self-signed certificate or a certificate issued by a cer-
tificate authority.
A
Open a Web Image Monitor.
B
Enter “http://(machine's-address)/” in the address bar to access the printer.
C
Log onto the machine.
The network administrator can log on.
Enter the login user name and login password.
D
Click [ Configuration ] , click [ Security ] , and then click [ SSL/TLS ] .
The [ SSL/TLS ] page appears.
E
Click
[ Enable ]
for
[ SSL/TLS ]
.
F
Click [ Apply ] .
The SSL setting is enabled.
G
Log off from the machine.
Note
❒
If you set [ Permit SSL / TLS Communication ] to [ Ciphertext Only ] , enter “ht-
tps://(machine's address)/” to access the machine.
User Settings for SSL (Secure Sockets Layer)
If you have installed a server certificate and enabled SSL (Secure Sockets Layer),
you need to install the certificate on the user’s computer.
The network administrator must explain the procedure for installing the certifi-
cate to users.
If a warning dialog box appears while accessing the machine using the Web Im-
age Monitor or IPP, start the Certificate Import Wizard and install a certificate.
A
When the [ Security Alert ] dialog box appears, click [ View Certificate ] .
The
[ Certificate ]
dialog box appears.
To be able to respond to inquiries from users about such problems as expiry
of the certificate, check the contents of the certificate.