682 Synergy Plus
34
Visit our website
4.5.2 Scale Format Menu
This section provides a flow chart and descriptions for the Scale Format menu.
Figure 4-8. Scale Format Menu
Table 4-7. Scale Format Menu Parameters
Parameter
Description
Primary
Scale format and units settings for the Primary format; Sub-Parameters:
Format – Sets the decimal point and the display divisions for the Primary display weight format;
Settings:
8888881
(Primary default), 8888882, 8888885, 8888810, 8888820, 8888850, 8888100, 8888200, 8888500,
88.88881, 88.88882, 88.88885, 888.8881, 888.8882, 888.8885, 8888.881, 8888.882, 8888.885, 88888.81, 88888.82,
88888.85, 888888.1, 888888.2, 888888.5
For example, select
8888.885
if a count by of 0.005 is needed or select
8888820
if a count by of 20 is needed
(the
8
s serve as placeholders and show a breakdown of how digits will display);
Units – Sets the units type;
Settings:
LB
(Primary default), KG, OZ, TN, T, G, NONE
for more information; Only displays under Primary;
Settings:
Off
(default), Multi-Range, Multi-Interval
Secondary and
Tertiary
Scale format and units settings for the Secondary and Tertiary format; Sub-Parameters:
Format – Sets the decimal point and the display divisions for the Secondary and Tertiary display weight format;
Settings: 8888881, 8888882, 8888885, 8888810, 8888820, 8888850, 8888100, 8888200, 8888500, 88.88881, 88.88882,
88.88885, 888.8881, 888.8882, 888.8885, 8888.881, 8888.882, 8888.885, 88888.81, 88888.82, 88888.85, 888888.1,
888888.2,
888888.5
(Secondary and Tertiary default)
For example, select
8888.885
if a count by of 0.005 is needed or select
8888820
if a count by of 20 is needed
(the
8
s serve as placeholders and show a breakdown of how digits will display);
Units – Sets the units type;
Settings: LB,
KG
(Secondary and Tertiary default), OZ, TN, T, G, NONE
Enabled – Enables the front panel UNITS button to toggle between the Primary, Secondary and Tertiary formats; Only
displays under Secondary and Tertiary;
Settings:
ON
(Secondary default), OFF (Tertiary default)
Custom Unit 1-3 Available custom units that can be set as the Secondary and Tertiary units to convert weight of the Primary unit; Sub-Parameters:
Label – Available to enter a name for custom units; maximum length is 2 alphanumeric characters; blank by default
Multiplier – Conversion factor/multiplier applied to the primary units to convert weight for custom units;
1.0
(default)
For example, to configure a custom unit to gallons (with primary units set to lb), set the custom unit multiplier to 8
Primary
Secondary
Custom Unit 1
Tertiary
Custom Unit 2
Custom Unit 3
Setup
Tare
User
Scale Format
Configuration
Calibration
Custom Unit 3
Summary of Contents for REVOLUTION 682 Synergy Plus
Page 129: ......
