RFS BD210WLP Series, User Manual

Page: 78 / 101

Radio Frequency Systems BD210WLP Series Air Dryer User’s Guide
Page 78 of 101 100518832 – Rev. B
10.3 Annual Maintenance
MODEL: LOCATION NAME:
SERIAL NUMBER: ADDRESS:
DATE INSTALLED:
Note: In the event of a high duty cycle application, it may be necessary to perform
preventative maintenance at more frequent intervals, which will be indicated by a
compressor total hour alarm. Refer to Compressor Total Hour Alarm (section 10.3 )
Maintenance Interval
Procedure Section 1 Year 2 Year 3 Year 4 Year 5 Year
Install Annual Maintenance Kit 11.3
    
Measure & Record
Compressor Amp Draw
9.2
Set System Pressure (50 PSI (344.7 KPa)) 8.9
    
Set Outlet Pressure 8.10
    
Test Consistent Heatless Dryer Cycling 9.5
    
Test Compressor ON/OFF Cycling 9.8
    
Test Air Fittings for Leaks 9.13
    
Reset TTL TIME Reading to Zero 8.7.4
    
Visually Inspect Inside & Outside of Unit for Loose
Wiring or Hardware
    
Maintenance Performed by:
Date of Maintenance:
Note: After annual maintenance is performed ensure that the compressor total hour count
is reset. Refer to Reset Compressor Total Hours (section 10.3 )
NOTE: COPY OR PRINT THIS PAGE AND KEEP IT WITH THE AIR DRYER