Radio Frequency Systems
BD210WLP Series Air Dryer User’s Guide
Page 19 of 101
100518832 – Rev. B
6.5.7.5
Install the U-shaped bracket
assembly into the server rack
by bolting the two mounting ear
brackets to the rails of the rack.
Refer to the manufacturer of the
server rack to determine the
hardware necessary for
component installation.
NOTE: If the server rack has additional mounting rails, an additional
set of mounting ears can be used to decrease unit sway (
see section
11.3 for ordering information).
6.5.7.6
From a supported
position, lift and slide
the unit into the U-
shaped bracket
assembly that is
installed in the server
rack. Take care to align
the drawer slide
components so that they
engage correctly with each other. Firmly push the unit until it is fully
installed, and the drawer slides will lock to prevent accidental
separation.
NOTE: The unit can be quickly removed from the U-shaped bracket
assembly without removal of mounting hardware by fully extending the
unit, pressing down on the black release levers on the drawer slides
(
See section 6.5.7.1 for detail),
and gently pulling the unit free
.
Summary of Contents for BD210WLP Series
Page 2: ......
