Radio Frequency Systems
BD210WLP Series Air Dryer User’s Guide
Page 62 of 101
100518832 – Rev. B
9.4 Measuring Incoming Voltage
9.4.1
Open Panel (see section 8.8 ).
9.4.2
Locate the incoming power terminal
block on the control board marked “AC
IN”
9.4.3
Use a Voltmeter to measure across the
board terminals where wires #4 and #5
are connected.
The voltage should measure
110 - 125 VAC
for the BD210WLP or
208 - 253 VAC
for the
BD212WLP.
9.4.4
Close Panel.
If the incoming voltage measures less than indicated above, it is recommended
that steps be taken at your facility to increase the power to the recommended level
of voltage.
WARNING!
Extreme care should be exercised to avoid contact with live
electrical circuits.
It is highly recommended that you remove all
jewelry before performing any procedures.
Summary of Contents for BD210WLP Series
Page 2: ......
