Antennas
Cellular Antennas
Attach the cellular antenna(s) with SMA male connector to the antenna
connectors on the router, which are located at each side of the router
housing.
The connector labelled
“A
NT
”
is the main antenna interface and must be
connected properly for the router to operate over cellular network. For
MIMO and Carrier Aggregation function, the “DRX” antenna m
ust be used.
Antenna Connectors
GNSS Antenna
Attach the GNSS antenna with SMA male connector to the antenna
connector on the router, which is located between the two cellular antenna
connectors and labelled with “GNSS”
.
Please avoid using excessive force when mounting the antennas as this may
result in unnecessary damage to the housing that holds the antenna
connectors.
Ethernet Interface
Connection of Ethernet interface is simple and straight forward. A minimum
of CAT5E cable is required to achieve gigabit speed. A lit green LED on up-
right corner of the each port indicats an active giagabit LAN conenction,
otherwise, the connection will be 10/100Mbps.
