Boot message:
option to enable/disable boot up messages over the
serial interface.
IPStack message:
option to enable/disable IP stack connection
messages over the serial interface.
Socket
This page is to configure the socket connection over serial interface.
Mode:
socket mode, either Server or Client.
Protocol:
the socket protocol in use, either TCP or UDP.
Primary Server Address:
the IP/URL of the primary socket server when
acting as set as a client.
Secondary Server Address:
the IP/URL of the secondary socket server
when set as a client.
Port:
the port number used for the socket connection.
IDLE Timeout:
the option to enable/disable IDEL timeout function.
IDLE Timeout Interval:
the maximum time in seconds for a socket
connection to stay in idle before being terminated.
