IP Pool
: This is to define the range of IP addresses for the PPTP client(s)
that connect to the sever, e.g. 192.168.100.2
–
192.168.100.10.
MPPE
: Microsoft Point-to-Point Encryption (MPPE) for PPTP data. The
options include NONE, MPPE 40, and MPPE 128. Default is NONE.
MPPE Stateful
: to use MPPE Stateful Mode by enabling this option.
Otherwise, Stateless Mode is in use. The option is disabled be default.
Asyncmap
: a 32-bit Asynchronous Control Character Map for LCP
control in hex format. For example, 0xffffffff will escape all control
characters. Set as 0x0 by default.
ACCM:
Option to enable/disable the use of Asyncmap (Asynchronous
Control Character Map) setting.
MRU
: Maximum Receive Unit. Use 1450 as default.
MTU
: Maximum Transmission Unit. Use 1450 as default.
Link Detection Interval(s)
: the interval in seconds between link checks.
Link Detection Retries:
the number of retries if PPTP link detection is
failed. If all retires are exhausted, the device will restart the VPN tunnel.
PFC:
Protocol Field Compression. Disabled by default
Client Credentials and IP Address Table
: the client(s) to connect need
to be set up with log in credentials and their associated IP addresses.
Up to 10 clients can be added.
The client will be assigned with the IP address that is associated with the
login credential.
