DNP3
Distributed Network Protocol (DNP3) is a set of communications protocols
used between components in process automation systems. It plays a crucial
role in SCADA systems, Remote Terminal Units (RTU), and Intelligent Electronic
Devices (IED). The protocol supported in Universal Hub is DNP3 Outstation.
General
The General settin3600gs allow user to configure device information as an
outstation, and relevant TCP/IP network configurations.
Start/Stop DNP3 Protocol:
option to run/stop the DNP3 protocol in the
Universal Hub. Stop by default.
Device Address:
the field sets the Local or "Slave" DNP3 Address of the
device. The DNP3 Device Address should be unique within the
application network. The address must be in the range 0 to 65519.
Master Address:
the field sets the DNP3 address of the Master station.
The address must be in the range 0 to 65519.
Time Update Request Rate:
the field specifies how long the local clock
will remain valid after receiving time synchronization from the DNP3
