REXROTH IndraDyn A Series, Project Planning Manual

Page: 199 / 220

Rexroth IndraDyn A Installation
11-1
11 Installation
11.1 Safety
WARNING
Injuries due to live parts! Lifting of heavy loads!
⇒
Install the motors only when they are de-energized
and not connected electrically.
⇒
Use suitable lifting equipment, protective equipment
and protective clothing during transport.
⇒
Do not lift or move the motor by the fan unit.
⇒
Observe the safety notes found in previous chapters.
Carry out all working steps especially carefully. In this way, you minimize
the risk of accidents and damages.
IndraDyn A motors from frame size 130 have additional threaded
holes on their long sides for inserting eyelets (for details, see the
dimension sheet). Additional eyelets can simplify handling and transport.
11.2 Mechanical Attachment
Mounting Holes
IndraDyn A motors are manufactured either for flange mounting
(structural shape 05) or for foot mounting (structural shape 35). Details for
the fastening holes can be found in the corresponding dimension sheet.
For mounting, the following general assignment applies:
B05 (flange assembly) B35 (Foot assembly)
Hole Bolt 1) Hole Bolt 1)
MAD/MAF
Ø [mm] Type M
GA
[Nm] Ø [mm] Type M
GA
[Nm]
100 14 M12 87 11 M10 51
130 12 M10 51
160 14
180
18 M16 215
14,5
M12 87
1) Type and torques as recommendations for bolts of fastening class 8.8.
M
GA
= Torque in Newton-meters.
Fig. 11-1: Mounting holes
Note:
The threaded connections must be able to take up both the
force due to the weight of the motor and the forces acting
during operation.