manualshive.com logo in svg

REX RKF 130, General Information Manual

Share
Download
REX RKF 130 General Information Manual Download Page 126

RKF 130 

 

Explanations 

 

Page 126 of 128 

 

Version 1.1 

8.

 

EXPLANATIONS 

8.1

 

DELIVERY EXPLANATION 

Company:

 

_________________________________ 

 

_________________________________ 

 

_________________________________ 

 

Customer no.:

 

_________________________________ 

 

The piston filler of  

 

 

Type

________ 

Machine no.:____________

 

 

was delivered. The piston filler was 

 

 

installed on: ________ by:_________________ 

 

 

demonstrated on: ________ by:_________________ / 

 

started. 

All protective gears and safety instructions were explained and illustrated on the piston filler on the 
basis of the operating instruction when demonstrating/starting up. The following persons were trained:

 

________________________________ 

____________________________ 

_____________________________ 

__________________________ 

The machine operation, maintenance and servicing was explained and illustrated on the piston filler on 
the basis of operating instructions. The following persons were trained:

 

_________________________________ 

____________________________ 

______________________________ 

__________________________ 

The following persons were instructed and trained when demonstrating the piston filler with the 
product: 

__________________________________ 

____________________________ 

_______________________________ 

__________________________ 

Operating instructions for the piston filler 

Type:

 _________________ 

No.:

 ____________________ 

were delivered on:

 ___________________ 

Protocol issued on:

 _________________________ 

________________________________ 

___________________________ 

(Signature/customer’s stamp/authorised person) 

(Signature of the technician/demonstrator)

 

Please send original signed copy back to the manufacturer/agent 

Summary of Contents for RKF 130

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands