Retsch Mixer Mill MM 500 nano, Manual

Page: 69 / 95

Device control
69
Element Function
N1.2 Main menu Opens the Main menu
ZN Number of the cycle
program Displays the number of the current cycle program
PS Parameter sets (A/B) A cycle program is divided into parameter sets A and B.
PE Parameter settings Displays the parameters of the active cycle program
(vibration frequency or grinding time)
WZ Repetitions of the cycle
program Indicates how often the configured cycle program is
repeated until the grinding process is completed.
WZA Repetitions of the current
cycle
After the grinding process has started, the current cycle
status is displayed here
B Scroll bar Indicator for the position of the cycle program
DZ Total duration of the cycle
program Shows the total duration of the cycle program until the
grinding process is completed (The total duration is made
up of the two parameter sets (A/B) and the repetitions.).

The total duration of a cycle program is limited to 99
hours.
S2.1 Pause cycle program Pauses the current cycle program
S2.2 Editor mode Opens the editor of the cycle program
S3.1 Start cycle program Starts the grinding process or the cycle program
S3.2 Stop cycle program Stops the current cycle program