Retsch Mixer Mill MM 500 nano, Manual

Page: 66 / 95

Device control
66
7.9.2 Edit a Program
Open the program editor in the Program mode by pressing the button (S2.2).
A program can be created, edited, saved and deleted in the program editor.
Fig. 45: Program editor
Element Funktion
N1.2 Main menu Opens the Main menu
N2.2 Cancel Cancels the current process and returns to the next higher
menu level
S1.2 Delete Deletes all parameters of the program
S2.3 Save Saves the program

Editing can be cancelled by pressing the button (N2.2).
All settings made will then be discarded.

Press on the parameter which needs to be edited.

Turn the rotary knob until the requested value is displayed.

Press the parameter again or select another parameter in order that the set value is accepted.

To save the parameters press (S2.3).
N1.2
N2.2
S2.3
S1.2